Neo’s Primer products are made of high quality Plastic emulsion ideal as an undercoat matte finish protective coating for newly plastered or previously painted walls. The cement primer is an undercoat to be applied after preparation of the surface and before applying the top coats.
NEO’s Paint products are high quality acrylic emulsion paint for exterior & interior walls. They provide luxurious semi glossy finish in addition to excellent weather & high scrub resistance. Products are specially formulated to withstand complex climates. They offer resistance to algae & fungal growth on cemented walls, asbestos-cement sheeting, gypsum & all concrete / brick works. Does not degrade upon exposure to UV. Internal paints offer unique Anti Bacterial Shield and offer protection against tough stains.
Requires no mixing or heating, saves labor costs.
Add aesthetic look to painted surfaces.
Highly resistant to acids and alkali climates.
Perfectly Suited for Exterior Top Finish.
Capacity to withstand extreme hot/cold, high rainfall / humidity.
Retains it look and does not degrade upon exposure to Sun light.
Substrates must be dry & free from dust, dirt & loose particles. Newly plastered walls must be perfectly cured. Wall imperfections like cracks, small pits, holes etc must be filled with Neo-acrylic putty. Previously coated films, chips, algae, fungus or moss growth should be removed by brushing & cleaning with water. All Neo Water Based Paint & Primer Products can also be applied on interior shadowed walls where diffused sun light persists. But it should not be applied on surfaces where continuous seepage or dampness prevails. Apply by airless conventional spray, brush or roller. Provide sufficient ventilation during application & drying of paint. Do not apply paint below 10 deg.C temp. Stir well & strain before use. The products are water dilutable.
Useful as a Decorative Painting for External & Internal Walls.
Keep in well ventilated place protected from heat & direct Sun Light. Cans must be tightly closed.
Paint and primer products are available in pack sizes of 1/4/10/20 litre packs.
|Product Type||Type of Application||Thinning Ratio|
|Exterior Paints||For conventional spray||Paint - 70 to 75 %; Water- 25 to 30 %|
|Exterior Paints||For Brush / Roller / Airless Spray||Paint - 80 to 85 %; Water- 15 to 20 %|
|Maintain viscosity of thinned paint at 40 to 45 sec. (sprayable) by Ford Cup #4 at 30oC.|
|Exterior / Interior Primer||For conventional spray||Paint - 70 to 75 %; Water-25 to 30 %|
|Exterior / Interior Primer||For Brush / Roller / Airless Spray||Paint-80 to 85 %; Water-15 to 20 %|
|Maintain viscosity of thinned paint primer at 25 to 35 sec. by Ford Cup #4 at 30oC|
Get Free Estimate : (+91) 7228862277 / 7227857700 / 7226077889